4097020

TNMG160408-MF2 TP3500 Insert

by Seco
$20.22 excl GST

TP3500 is Intended for rough or intermittent turning in steels and stainless steels as well as general turning of stainless steels.
Ti(C,N) + Al2O3 DURATOMIC®

-MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining.

Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.



Product Documents