4092960

TCMT16T308-MF2 CP500 Insert

by Seco
$22.33 excl GST

CP500 Grade: Tough micrograin grade intended for finishing to medium-roughing of stainless steels but with wide applicability for example in steels and aluminium alloys. Especially suitable in intermittent cuts.
(Ti,Al)N + TiN

p>MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm,
provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining.
Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.

Product Documents

You recently viewed

Clear recently viewed