Quatro MS Sealant White 300gm 8361 Ados

$25.36 excl GST
Application Temperature +5 to +30 °C
Brand ADOS
Change in Volume <1 %
Chemical Composition MS Polymer
Color White
Container Size 400 g
Container Type Cartridge
Cure Time 2 to 3 mm/days
Elongation at Break 600 to 700% (ISO 8339); 500 to 700% (ISO 37 ROD1)
Hardness 15 to 20 Shore A
Maximum Joint Depth 20 mm
Maximum Joint Width 20 mm
Modulus of Elasticity 0.20 to 0.30 MPa
Physical Form Non Slump Paste
Product Type Adhesive Sealant
Relative Density 1.4
Resistant Properties Water Resistant; Mild Solvents Resistant; Mineral Oils Resistant; Fat Resistant; Low Concentration Anorganic Acids and Bases Resistant
Service Temperature Range -40 to +90 °C
Skin Formation Time 20 to 30 min
Solubility Immiscible
Specific Gravity 1460 kg/m³
Tensile Strength 0.40 to 0.60 MPa (ISO 8339); 1.00 to 1.40 MPa (ISO 37 ROD1)
Excellent adhesion strength – To a wide range of substrates commonly used in the building, construction and engineering industries.
Waterproofs, bonds and seals – Wide variety of applications.
Paint compatibility – Cured product can be painted with most solvent and water based paints and varnishes.
Solvent-free, low VOC content, odourless – Environmentally and user friendly.
Durability – Will not crack, yellow or age in adverse weather conditions and UV exposure.
Highly flexible – Excellent mechanical properties over a wide temperature range for use in dilation joints. 
Non-slump – Suitable for vertical joints.
Interior and exterior use.
Extreme low shrinkage – Less than 1%, allows application in thick layers.
Non-bubbling – The surface stays smooth and intact.
Primerless one-component product – Convenient and time saving on construction sites.
Cures fast – For increased productivity.
Skins over in a short time – To resist dirt and dust pickup.
Easy handling – Can be extruded from cartridges with a low force even in low temperatures
Totally chemically neutral.
Good chemical resistance – To water, mild solvents, mineral oils, fat, low concentration an organic acids and bases.
Easy clean up – Just wipe up any excess uncured product with a wet cloth.
Use on most substrates – PVC, concrete, brick, timber, glass, aluminium, iron, steel, stainless steel, copper, ceramic, plywood, many of the newly developed materials for construction, fiberglass, various plastics.
Contains no solvents or isocyanates.

Product Documents

Customer Reviews