Ejector Pin H13 Nitrided 3.5 x 150mm (Head 7Ø x 4mm)
Matl. = SKD61 = H13/Hardness = HV900 Surface, & HRC 42-47 Inside.
t : 4mm
d : 3.5mm
l : 150mm
h : 7mm
Other sizes of pins and sleeves also available on indent. *Un-nitrided pins are from FDAC (=H11) material with a through hardness of 35-40 HRC, and so can be machined to desired shape, then nitrided without further heat treatment.