KNZ3155

Ejector Pin H13 Nitrided Stepped D1=3.0,D=2.0,L=250,N=50mm (Head 6Ø x 4mm)

by Other
$6.21 excl GST
Description
Ejector pin tolerance -0.01/-0.02 on main pin diameter (note: dimension not to be take within 30mm of the underside of the head) Head diameter tolerance +0.00/-0.02 x Head thickness +0.00/-0.05mm
Matl. = SKD61 = H13/Hardness = HV900 Surface, & HRC 42-47 Inside.
d: 2.0mm
d1: 3.0mm
l: 250mm
n: 50mm
h: 6mmØ
t: 4mm
Other sizes of pins and sleeves also available on indent. Un-nitrided pins are from FDAC (=H11) material with a through hardness of 35-40 HRC, and so can be machined to desired shape, then nitrided without further heat treatment.

Product Documents

Customer Reviews

You recently viewed

Clear recently viewed