DNMU110408-MF2 TP2500 Insert
TP2500 is intended for a wide range of turning applications in both steel and stainless steel and is also
a good choice for cast iron. The wear resistance and edge strength together with the high versatility
make the grade the first choice in a large number of applications.
Ti(C,N) + Al2O3 DURATOMIC®
-MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining.
Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.